Table of Contents
Advertisement
2.3 Type V Camera Installation
2.3.1
Ceiling Mounting
Steps:
1. Disassemble the turret camera by rotating the camera to
align the notch to one of the marks, as shown in Figure 2. 19.
Figure 2. 19 Disassemble the Camera
2. Remove the mounting base from the camera body with a flat
object, e.g., a coin.
3. Attach the drill template (supplied) to the place where you
want to install the camera, and then drill the screw holes and
the cable hole (optional) on the ceiling according to the drill
template.
Note:
Cable hole is required when adopting ceiling outlet to route the
cable.
26
Advertisement
Table of Contents
