System Settings - D-Link DSL-3890 User Manual

Section 4 - Configuration
This page allows you to save the router's current configuration, load a
previously saved configuration, reset the router to its factory default settings,
or reboot the router. To access this page, click System Settings from the
Management menu on the bar at the top of the page.
Device Information
Hardware Version: The hardware version of the router is displayed here.
Firmware Version:
The current firmware version is displayed here.
System
Save and Reboot Click to reboot the router.
The Device:
Restore To Factory
This option will restore all configuration settings back to the settings that
Default Settings: were in effect at the time the router was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router configuration
settings, use the Save Settings To Local Hard Drive button below.
Save Settings To
This option will save the current router configuration settings to a file
Local Hard Drive: on your computer.
Load Settings This option will load a previously saved router configuration file. This will
From Local Hard
overwrite the router's current configuration.
Drive:
D-Link DSL-3890 User Manual

System Settings

67