Table of Contents
Advertisement
Section 4 - Configuration
Advanced Settings
You may select one of the following DHCP mode behaviors:
Disable DHCP
Select this option to disable the DHCP server. No further configuration
Server:
is available.
Enable DHCP
Select this option to enable the DHCP server.
Server:
DHCP Relay:
Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network.
If you selected Enable DHCP, the following options are available:
DHCP IP Address
Enter the starting and ending IP addresses for the DHCP server's IP
Range:
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
DHCP Lease Time:
Select the DHCP lease time from the drop down menu.
Option60 Vendor
Enter Option60 information here. (Optional)
ID:
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
D-Link DSL-3890 User Manual
Network - Advanced Settings
46
Hide quick links:
Advertisement
Table of Contents
