Interrupting A Programme And Changing The Options; Cancelling A Running Programme; Hints And Tips - Zanussi ZWS76100SS User Manual

INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press the button Départ/Pause - Start/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Départ/Pause - Start/Pause
again.
The programme continues.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
While a programme or the delay start operates, the
appliance door is locked.
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
To open the door during the first minutes of the
cycle or when the delay start operates:
1. Press the button Départ/Pause - Start/Pause
to pause the appliance.
2. Wait some minutes until the door unlocks.
3. You can open the door.
4. Close the door and touch the button Départ/
Pause - Start/Pause again. The programme (or
the delay) continues.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.

HINTS AND TIPS

THE LAUNDRY LOAD
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that are on the
laundry care labels.
• The indicator of the button Départ/Pause -
Start/Pause goes off. The phase indicator
illuminates and stays on.
• Turn the programme knob to position
deactivate the appliance.
• After some minutes you can open the door.
• Remove the laundry from the appliance. Make
sure that the drum is empty.
• Close the water tap.
• Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
to
• The drum turns regularly to prevent the creases
in the laundry.
• The indicator
• The indicator Départ/Pause - Start/Pause
flashes to remind you to drain the water.
• You must drain the water to open the door.
Draining the water:
1. Set a draining (Vidange - Drain) or a spinning
(Essorage - Spin) programme.
2. Press the button Départ/Pause - Start/Pause.
The appliance drains the water and spins.
3. When the programme is completed:
• The indicator Départ/Pause - Start/Pause
goes off and the phase indicator
illuminates.
• After some minutes the door unlocks; you
can now open the door.
4. Turn the programme knob to the position
deactivate the appliance.
STAND BY
Some minutes after the end of the washing
programme, if you do not deactivate the appliance,
the energy saving status activates. The energy
saving status decreases the energy consumption
when the appliance is on the standby:
• The brightness of the indicators reduces.
• The indicator of the button Départ/Pause -
Start/Pause flashes slowly.
Press one of the buttons to deactivate the energy
saving status.
• Do not wash white and coloured items together.
• Some coloured items can discolour with the first
wash. We recommend that you wash them
separately for the first times.
• Turn multilayered fabrics, wool and items with
painted illustrations inside out.
stays on.
to
to
13