SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance •...
SERVICE • To repair the appliance contact an Authorised WARNING! Risk of injury, electrical Service Centre. shock, fire, burns or damage to the • Use original spare parts only. appliance. DISPOSAL • This appliance is for household use only. • Follow the safety instructions on the detergent WARNING! Risk of injury or packaging.
– You set a option that is not suitable for – You change the programme while it the programme. operates. PROGRAMMES PROGRAMME CHART Programme Maximum load Programme description Temperature range Maximum spin speed (Type of load and soil level) Washing programmes 7 kg White cotton and coloured cotton.
Page 7
Programme Maximum load Programme description Temperature range Maximum spin speed (Type of load and soil level) 7 kg To drain the water in the drum. All fabrics. Слив 7 kg To spin the laundry and to drain the water in 1200 rpm the drum.
CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant standards. Different cau- ses can change the data: the quantity and type of laundry and ambient temperature. Wa- ter pressure, the supply voltage and the temperature of inlet water may also affect the washing programme duration.
Page 10
OPTIONS Set this option for items with light soil or items to ТЕМПЕРАТУРА refresh. With this option you can change the default temperature. ДОП. ПОЛОСКАНИЕ Indicator = cold water. With this option you can add some rinses to a The indicator of the set temperature comes on. washing programme.
BEFORE FIRST USE 1. Connect the mains plug to the mains socket. 5. Set and start a programme for cotton at the 2. Open the water tap. highest temperature without laundry. 3. Put 2 litre of water in the detergent This removes all possible dirt from the drum and the compartment for washing phase.
LIQUID OR POWDER DETERGENT To use only liquid de- Pull out the detergent tergent: dispenser until it stops. Insert the detergent divid- er in position C. The position C of the de- The position A of the de- tergent divider is for liq- tergent divider is for uid detergent.
Page 13
INTERRUPTING A PROGRAMME AND The indicator of the button Старт/Пауза • CHANGING THE OPTIONS stops to flash and stays on. • The programme starts, the door locks, the You can change only some options before they operate. indicator is on. 1.
STAND BY • The door lock indicator is on. The indicator Some minutes after the end of the washing of button Старт/Пауза flashes. The door stays programme, if you do not deactivate the appliance, locked. the energy saving status activates. The energy •...
softener for washing machines. In areas where the Use the correct quantity of the water softener. water hardness is soft it is not necessary to use a Obey the instructions that you find on the water softener. packaging of the product. To know the water hardness in your area, contact your local water authority.
CLEANING THE DRAIN FILTER CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° EMERGENCY DRAIN 2. Start the programme to drain the water Because of a malfunction, the appliance cannot FROST PRECAUTIONS drain the water. If the appliance is installed in an area where the If this occurs, do steps (1) through (10) of temperature can be less than 0°...
4. Empty the drain pump. Refer to the emergency WARNING! Make sure that the drain procedure. temperature is higher than 0 °C before 5. When the drain pump is empty, install the inlet you use the appliance again. hose again. The manufacturer is not responsible for damages caused by low temperatures.
Page 18
Problem Possible solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the filter, if nec- essary.
TECHNICAL DATA Dimension Width/ Height/ Depth/ To- 595 mm / 850 mm / 450 mm / 490 mm tal depth Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 13 A 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against...
Need help?
Do you have a question about the ZWSH 7121 VS and is the answer not in the manual?
Questions and answers