Zanussi ZWS 5883 User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Washer
  5. ZWS 5883
  6. User manual
Zanussi ZWS 5883 User Manual

Zanussi ZWS 5883 User Manual

Washing machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User manual
2
GB
Washing Machine
ZWS 5883

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZWS 5883

Summary of Contents for Zanussi ZWS 5883

  • Page 1 User manual Washing Machine ZWS 5883...

  • Page 2: Table Of Contents

    Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 15...
  • Page 3 • All packing and transit bolts must be removed • Never pull the power supply cable to remove before use. Serious damage can occur to the the plug from the socket; always take hold of product and to property if this is not adhered the plug itself.

  • Page 4: Product Description

    Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for pre- wash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the be- ginning of the wash programme.

  • Page 5: Control Panel

    Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages. Programme selector dial EXTRA RINSE button Temperature selector dial START/PAUSE button SPIN reduction button...

  • Page 6: First Use

    Rinse hold quantity of water (extra rinse), select this option. Some additional rinses will be performed. This By selecting this function the water of the last option is recommended for people who are al- rinse is not emptied out to prevent the fabrics lergic to detergents, and in areas where the water from creasing.
  • Page 7 rect option is selected, the integrated red pilot Pull out the dispenser drawer until it stops. light of the button 6 flashes for 3 times. Measure out the amount of detergent re- For the compatibility among the washing quired, pour it into the main wash compart- programmes and the options see chapter ment or in the appropriate compartment if...

  • Page 8: Helpful Hints And Tips

    If the door remains locked, this means that the luminates but the door remains locked to indi- machine is already heating or that the water level cate that the water must be emptied out before is too high. In any case, do not try to force the opening the door.

  • Page 9: Washing Programmes

    Ink: depending on the type of ink, moisten the Your appliance incorporates a recirculation sys- tem which allows an optimal use of the concen- fabric first with acetone , then with acetic acid; trated detergent. treat any residual marks on white fabrics with Follow the product manufacturer’s recommen- bleach and then rinse thoroughly.
  • Page 10 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry COTTON SPIN, RINSE HOLD, 90°-Cold EASY IRON , SUPER Main wash - Rinses QUICK, EXTRA RINSE Maximum spin speed 800 rpm Max.
  • Page 11 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SYNTHETICS + PREWASH SPIN, RINSE HOLD, 60°-Cold EASY IRON , SUPER Prewash - Main wash - Rinses QUICK, EXTRA RINSE Maximum spin speed 800 rpm Max.
  • Page 12 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry HYGENE PLUS SPIN, RINSE HOLD, 90°-40° EASY IRON , EXTRA Main wash - Rinses RINSE Maximum spin speed 800 rpm Max. load 6 kg Hygiene plus cycle to sanitize cotton and synthetic items.

  • Page 13: What To Do If

    What to do if… Certain problems are due to lack of simple main- Once the problem has been eliminated, press the tenance or oversights, which can be solved easily button 6 to restart the programme. If after all without calling out an engineer. Before contact- checks, the problem persists, contact your local ing your local Service Centre, please carry out the Service Centre.
  • Page 14 Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fit- tings. It is not always easy to see this as the water runs down the hose;...

  • Page 15: Technical Data

    Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redis- tributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.

  • Page 16: Care And Cleaning

    Programme Energy consumption Water consumption (li- Programme duration (KWh) tres) (Minutes) Cottons 40° 0.75 Synthetics 40° Delicates 40° 0.55 Wool/ Handwash 30° 1) «Cottons Eco» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.
  • Page 17 Drain pump Remove any objects The pump should be inspected regularly and par- from the pump impel- ticularly if: ler by rotating it. • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc.

  • Page 18: Installation

    Cleaning the water inlet filter Emergency emptying out If your water is very hard or contains traces of If the water is not discharged, proceed as follows lime deposit, the water inlet filter may become to empty out the machine: clogged.
  • Page 19 If necessary, check the setting with a spirit level. Unscrew the three Slide out the relevant bolts. plastic spacers. Water inlet Warning! This appliance must be connected to a cold water supply Caution! Before connecting up the appliance to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected...

  • Page 20: Electrical Connection

    The other end of the inlet hose which connects In this case, make sure the end cannot come to the appliance can be turned as showed in the unhooked when the machine is emptying. This picture. could be done by tying it to the tap with a piece Do not place the inlet hose downwards.
  • Page 21 Ecological hints you will help prevent potential negative To save water, energy and to help protect the consequences for the environment and human environment, we recommend that you follow health, which could otherwise be caused by these tips: inappropriate waste handling of this product. For •...
  • Page 24 1 web portal 2 www.zanussi.com...

Table of Contents