Quick Start Guide - Maytag BRAVOS MVWB800VQ0 Use & Care Manual

Automatic washer
Table of Contents

Advertisement

Available languages

Available languages

NOTE: The panel shown above may be different from that of your model.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
The following is a guide to using your washer. Please refer to specific sections of this manual for more detailed information.
OPERATING CONTROLS
POWER/CANCEL - Press POWER/CANCEL to turn the
washer on or off.
Start - Press START/PAUSE to start your washer after a cycle has
been selected. Be sure all desired Modifiers and Options
have been selected. The lid must be closed for the washer
to start.
START/PAUSE - Press START/PAUSE to start your washer
after a cycle has been selected. Be sure all desired Modifiers
and Options have been selected. Press START/PAUSE once
to unlock the lid and add a garment. Press START/PAUSE to
complete the cycle from where it was stopped. The lid must
be closed for the washer to start. Press POWER/CANCEL to
stop the wash cycle. The washer will then drain and turn off.
Lid Lock - When the Lid Lock status light glows, the washer
lid is locked. The lid must be closed for the washer to Start.
NOTE: You must wait until the Lid Lock Light turns off before
the lid can be opened.
OPTIONS AND MODIFIERS
You can change Options and Modifiers anytime
before Start/Pause is pressed.
Press POWER/CANCEL.
Select Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START/PAUSE or select DELAY START (on some
models) to start wash at a later time.
Changing cycles after pressing Start:
Press POWER/CANCEL once to cancel the cycle.
The washer will drain
Select desired Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START/PAUSE or select DELAY START (on some
models) to start wash at a later time. Washer restarts at the
beginning of the new cycle.
NOTE: An error tone will sound if your selection is unavailable.
6

QUICK START GUIDE

DETERGENT USE
Use only High Efficiency (HE) detergents.
Using regular detergent will likely result in
wash errors, longer cycle times, and
reduced rinsing performance.
For more information, see "Using the Proper Detergent."
ADD A GARMENT, PAUSING, OR
RESTARTING THE WASHER
You can place additional clothing in the wash
when the "Add a Garment" status light is
glowing without sacrificing wash
performance, at which time, you can:
Press START/PAUSE once. (Lid Lock light turns off,
then open the lid.)
Add garments. (Close washer lid.)
Press START/PAUSE to restart.
To unlock the lid after the Add a garment period,
Press START/PAUSE once. Pressing POWER/CANCEL
will cancel the wash cycle.
STOPPING THE WASHER
You can stop the wash cycle and drain the tub by pressing
the Power/Cancel button once.

Advertisement

Table of Contents
loading

Table of Contents