LW20 / SF20 LiDAR sensor
Product manual
6.1
How to communicate with the LW20 using the Devantech USB to I2C module
Figure 13 :: Connection to a Devantech USB-ISS module
The I2C interface is designed for machine-to-machine communications with multiple devices over a small network. In order to test
the I2C interface on the LW20, an I2C to USB converter can be connected and a limited number of commands can be sent to the LW20
using the LightWare Terminal application.
Figure 14 :: The LightWare Terminal application top level window showing the toolbar
Select the correct protocol using the "Settings" icon on the toolbar of the LightWare Terminal. This should match the I2C converter
being used and in this example the Devantech USB-ISS adaptor is shown.
Figure 15 :: Selecting the Devantech I2C-ISS converter
|
|
|
LW20 / SF20 LiDAR - Product manual - Revision 7
13
of
28
© LightWare Optoelectronics (Pty) Ltd, 2018
www.lightware.co.za