Table of Contents
Advertisement
TX90 6kVA & 10kVA User's Manual
Installation And Operation
Note: The packing condition and the external outlook of the unit should be inspected carefully before installation.
Retain the packing material for future use.
Unpacking
• Take the battery bank out of the PE foam.
• Remove the packing materials.
• Note: The battery bank module is approx. 120 kgs, be cautious when unpacking and lifting the unit to avoid
injury.
• Standard Package includes:
o User's Manual
o DC connection cable.
o A pair of kits to fix DC connect cable.
o The casters cover kits.
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to
the battery bank and extend the life of the batteries. Please follow the instructions below:
1. Keep at least 8 inches clearance from the rear panel of the battery bank from the wall or other obstruc-
tions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in accordance with the battery bank work-
ing specifications to avoid overheat and excessive moisture.
4. Do not place the battery bank in a dusty or corrosive environment or near any flammable objects.
5. This battery bank is not designed for outdoor use.
Xtreme Power Conversion Corporation
Uninterruptible Power Supply
Page 38
Advertisement
Table of Contents
