Table of Contents
Advertisement
TX90 6kVA & 10kVA User's Manual
"Bypass" mode. In the upper right-hand corner of the LCD a
4. Turn off the UPS Utility breaker. You may proceed with UPS maintenance now.
5. When you are done with UPS maintenance put the UPS back into normal working mode as explained
previously. Then return the CAM switch to "INV" mode, replace the cover. The UPS will switch back to
inverter mode.
6. The UPS will alert for ten seconds to warn that the procedure is abnormal and may damage the UPS
due to uncertain utility status. The UPS will switch back to Inverter mode immediately if you turn the
CAM switch back to "INV".
Xtreme Power Conversion Corporation
Uninterruptible Power Supply
sign will appear.
Page 23
Advertisement
Table of Contents
