Napoleon CBI360-2N Installation And Operation Manual page 25

symptom
Lights or blower Control module switch in
won't function (if wrong position.
equipped).
COM switch is unplugged.
Flames are very Door is ajar.
aggressive.
Venting action is too great.
Appliance won't per- No power to the system.
form any functions.
Receiver switch in wrong
position (if equipped).
Transmitter isn't operational.
problem
- Verify ON/OFF switch is in the "I" position which denotes on.
- Verify "COM" switch is plugged into the front of the control
module.
- Ensure door is secured properly.
- Check to ensure venting is properly sealed or restrict vent
exit with restrictor plate. (Not available in all appliances).
- Check breaker to verify it's in the "on" position.
- Verify that the 3 position switch on the receiver is in the
remote position (middle).
- Check battery power and battery orientation.
troubleshooting
test solution
W415-2342 / 08.27.19
EN
25