Samsung SyncMaster 730MP Manual page 53

4. Problems related to Remote Control
Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do
Q & A
not respond.
Question
How can I change the frequency?
How can I adjust the resolution?
Q & A
Question
How can I set the Power Saving
How can I change the
function?
frequency?
How can I clean the outer
case/LCD Panel?
How can I adjust the resolution?
How can I set the Power Saving
function?
How can I clean the outer
case/LCD Panel?
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the
vicinity.
Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the
Frequency can be changed by reconfiguring the video card.
vicinity.
Note that video card support can vary, depending on the version of the
driver used. (Refer to the computer or the video card manual for
details.)
Windows ME/XP/2000 : Set the resolution at the Control
Panel→Display→Settings.
* Contact the video card manufacturer for details.
Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
Frequency can be changed by reconfiguring the video card.
computer or the screen saver. (Refer to Windows/Computer Manual).
Note that video card support can vary, depending on the
version of the driver used. (Refer to the computer or the video
Disconnect the power cord and then clean the monitor with a soft cloth,
card manual for details.)
using either a cleaning solution or plain water.
Windows ME/XP/2000 : Set the resolution at the Control
Do not leave any remains of the detergent nor scratch the case. Do not
Panel→Display→Settings.
allow any water to go inside the monitor.
Contact the video card manufacturer for details.
Windows ME/XP/2000 : Set the function at BIOS-SETUP of
the computer or the screen saver. (Refer to
Windows/Computer Manual).
Disconnect the power cord and then clean the monitor with a
soft cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the
case. Do not allow any water to go inside the monitor.
Items to check
Answer
Answer