Samsung SyncMaster 730MP Manual page 50

Contact the computer dealer or manufacturer for information on Safe Mode Booting.
Refer to Specifications >
supported by the monitor.
Sometimes the screen turns black without the "Not Supported Mode" message appearing on the screen.
This indicates the monitor is set for a frequency out of range or the PowerSaver mode is on.
Contact the computer dealer or manufacturer for information on Safe Mode Booting.
3. Not Optimum Mode
Refer to Specifications >
If the vertical resolution is not in optimum mode, you can still see the display but the warning message
supported by the monitor.
below appears and disappears after one minute.
The user must adjust the frequency within that one minute.
Sometimes the screen turns black without the "Not Supported Mode" message appearing on the screen.
This indicates the monitor is set for a frequency out of range or the PowerSaver mode is on.
3. Not Optimum Mode
If the vertical resolution is set to 85Hz, you can still see the display but the warning message below
appears and disappears after one minute. Since the monitor does not support a vertical resolution that is
85Hz higher, the monitor goes into "Not Supported Mode" and the screen becomes blank after one
Refer to Specifications >
minute.
supported by the monitor.
The user must adjust the frequency within that one minute.
4. Display Adapter Driver
Display adapter refers to the computer video card driver.
If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot
install the monitor driver.
1. Checking Adapter Driver
If the resolution is set to UXGA (1600x1200 60Hz), the same warning message as above appears and
Click Start Settings
disappears after one minute, but the display still works properly. (Down-Scaling)
Adapter.
If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly
installed. Install the adapter driver again according to the information provided by the computer or
video card manufacturers.
4. Display Adapter Driver
2. Installing Adapter Driver
Display adapter refers to the computer video card driver.
If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot The instructions given below are for general circumstances.
install the monitor driver. For specific issues, contact the relevant computer or video card manufacturers.
1) Click Start
1. Checking Adapter Driver
Adapter
Click Start Settings
Adapter.
that I can choose a specific driver
If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly
OK
installed. Install the adapter driver again according to the information provided by the computer or
2) In case you have Adapter Driver Setup file on your computer:
video card manufacturers.
Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.
2. Installing Adapter Driver
The instructions given below are for general circumstances.
5. Maintenance and Cleaning
For specific issues, contact the relevant computer or video card manufacturers.
1. Maintaining the Monitor Case.
1) Click Start
Clean with a soft cloth after disconnecting the power cord.
Adapter
that I can choose a specific driver
OK
2) In case you have Adapter Driver Setup file on your computer:
Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.
2. Maintaining the Flat Panel Display Screen.
5. Maintenance and Cleaning
Clean with a soft cloth (cotton flannel) smoothly.
1. Maintaining the Monitor Case.
Clean with a soft cloth after disconnecting the power cord.
Preset Timing Modes
Preset Timing Modes
Preset Timing Modes
Control Panel
Settings Control Panel
Update Driver Next
Control Panel
Next
Next Next Finish.
Settings Control Panel
Update Driver Next
Next
Do not use benzene, thinner or other flammable substances, or a
Next Next Finish.
wet cloth.
We recommend a Samsung cleansing agent is used to prevent
damage to the screen.
Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen surface.)
The user will be required to pay costs and related expenses for
Do not use benzene, thinner or other flammable substances, or a
repair of damages caused by him/her.
wet cloth.
We recommend a Samsung cleansing agent is used to prevent
damage to the screen.
for the resolutions or frequencies that are
for the resolutions or frequencies that are
for the resolutions or frequencies that are
Display Settings
Display Settings
Display a list of the known drivers for this device so
Display Settings
Have Disk (Insert Video Card Driver diskette)
Display Settings
Display a list of the known drivers for this device so
Have Disk (Insert Video Card Driver diskette)
Advanced
Advanced
Advanced
Advanced