Connecting The Monitor - Samsung SyncMaster 730MP Manual

Hide thumbs Also See for SyncMaster 730MP:

Table of Contents

Connecting the monitor

1. Connecting to a Computer

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Using the D-sub (Analog) connector on the video card.

2-1.

Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

Using the DVI (Digital) connector on the video card.

2-2.

Using the DVI (Digital) connector on the video card.

2-2.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

Connect the audio cable for your monitor to the audio port on the back of your computer.

Turn on both your computer and the monitor.

Connect the power cord insert a plug in a wall outlet.

You may enjoy clear and quality sound from the computer sound card using the monitor speakers.

Turn on both your computer and the monitor.

(You don't need to install any separate speakers for your computer.)

You may enjoy clear and quality sound from the computer sound card using the monitor speakers.

(You don't need to install any separate speakers for your computer.)

You may get a blank screen depending on the type of video card you are using, if you connect

simultaneously both the D-sub and DVI cables to one computer.

You may get a blank screen depending on the type of video card you are using, if you connect

simultaneously both the D-sub and DVI cables to one computer.

If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check

Table of Contents

Show Quick Links

Table of Contents