Room Thermostat Control - Using The Room Temperature Home Page - Daikin Altherma EBLQ05CAV3 User Reference Manual

4 Operation
You can...
Define preset values.
Condition: Leaving water set point is linked
with the room temperature set point.
Only change this if the desired room
temperature cannot be reached.
See also:
▪ "4.4.6 Room thermostat control - Using the leaving water
temperature home pages" on page 9
▪ "4.7 Preset values and schedules" on page 16
4.4.5 Room thermostat control - Using the
room temperature home page
Typical room temperature home pages
Depending on the user profile, the user interface gives you either a
basic or a detailed home page. To set the user profile, refer to
"4.6.6 Configuring user profile and home pages" on
User profile = Basic
Mon 15:20
Room
20.0°C
Actual temperature
To read out the actual and desired room
temperature
1 Go to the room temperature home page (Room).
Result: You can read
20.0°C
Actual temperature
2 Press .
Result: You can read
22.0°C
Desired temperature
To temporarily overrule the room temperature
schedule
1 Go to the room temperature home page (Room).
2 Use or to adjust the temperature.
To change the mode from scheduled to preset
value
Prerequisite: User profile = Detailed.
1 Go to the room temperature home page (Room).
2 Press or to select a preset value ( or ).
Result: The mode will return to Scheduled according to the overrule
period.
Example: Temporarily overruling the schedule
AND changing the mode to preset value
You have configured the following settings:
User reference guide
8
Location
Menu structure
page 16.
User profile = Detailed
Mon 15:20
20.0°C
Room
Actual temperature
Scheduled
Tue 17:30
out the actual temperature.
out the desired temperature.
Settings
Preset values Comfort (heating) =
20°C
Eco (heating) = 18°C Desired temperature:
Schedule 07:00 Comfort
09:00 Eco
17:00 Comfort
19:00 21°C
23:00 Eco
Overrule period 2 hours
(Temperature
lock)
If user profile = Basic, then you can temporarily overrule the room
temperature schedule by pressing
Situation
15:20
18.0°C
15:20
19.0°C
If user profile = Detailed, then you can:
▪ Temporarily overrule the room temperature schedule by
pressing or (same as if user profile = Basic)
▪ Change the mode from scheduled to a preset value by pressing
or
Situation
15:20
18.0°C
Scheduled
Mon 17:00
Daikin Altherma low temperature monobloc
Description
Desired temperature when
you are at home.
▪ When you are away
▪ During the night
You are at home.
Desired temperature =
preset value (Comfort
(heating)).
You are away.
Desired temperature =
preset value (Eco
(heating)).
You are at home.
Desired temperature =
preset value (Comfort
(heating)).
You are at home and want
it to be a little warmer.
Desired temperature =
custom temperature.
Desired temperature =
preset value (Eco
(heating)).
If you temporarily overrule
the schedule by a preset
value, after 2 hours the
schedule will be used
again.
or .
Description
15:20 => Scheduled temperature
= preset value (Eco (heating)) =
18°C.
You temporarily overrule the
schedule.
Desired temperature = custom
temperature = 19°C.
At the next scheduled action
(17:00), the schedule will be
used again.
Description
Room temperature schedule is
used.
15:20 => Desired temperature =
preset value (Eco (heating)) =
18°C.
The next scheduled action is at
17:00 and the desired
temperature will then increase.
EBLQ05+07CAV3 + EDLQ05+07CAV3
4P405545-1C – 2018.06