LG T1369NEFTF Owner's Manual page 24

Table of Contents

Advertisement

Available languages

Available languages

Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time
is selected.
Rinse
• Use this option to change the number of rinses.
• Press Rinse button to change the number of rinses.
• When the Rinse option is selected,
is lit.
• If selecting the maximum number of rinses,
then this option is deactivated.
NOTE
• This option is only available on some programmes.
Spin
Use this option to change the spin strength.
When you press the START/PAUSE button
after selecting this option, the remaining time is
indicated on the display.
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Delay button to set the required
delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
− 1 hour interval up to 3 - 12 hours
− 2 hours interval up to 12 - 18 hours
24
• This function cannot be set for less than 3
hours.
• To cancel this function, press Delay button
repeatedly until the reservation is cancelled
or press the POWER button to turn off and on
power.
.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
l
icon
• Press the Wash button until
turn on simultaneously.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this
function. You must deactivate this function
before you can access any other options and
functions.
Locking the Control Panel
1
2
Unlocking the Control Panel
1
2
Turn on the power.
Press and hold the Rinse and Spin buttons
simultaneously for 3 seconds to activate this
function.
Turn on the power.
Press and hold the Rinse and Spin buttons
simultaneously for 3 seconds to deactivate this
function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
EN
u
k
and
icons
CL
and the

Advertisement

Table of Contents
loading

Table of Contents