Replacing The Fuse; Technical Specifications - Omnitronic KPR-210A User Manual

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
If the speaker-system distorts, one of the loudspeakers may be defective. Test the speaker-system once
more with another sound-signal. If the sound remains distorted, the speaker-system should not be operated
any more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker-system, screws may have loosened due to the continuous
vibrations. The speaker-system should be checked by a specialist. Especially for public use, the speaker-
system should be checked before every operation so that the speaker-system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Fuse:
Rated power:
Program power:
Components:
Max. SPL (1 m):
Amplifier:
Nominal power output:
Maximum power output: 240 W
Inputs:
1 Mic
1 Line
Outputs:
1 Line Out
Frequency-range:
Dimensions (H x W x D): 515 x 380 x 315 mm
Weight:
Please note: Every information is subject to change without prior notice. 27.06.2006 ©
KPR-210A
115/230 V AC, 50/60 Hz ~
230 W
T 3 A, 250 V
120 W RMS
240 W
10" woofer, 1.35" horn
110 dB (1 m)
120 W RMS
XLR or balanced ¼" jack
XLR or RCA
XLR or balanced ¼" jack
50 Hz - 20 kHz
13 kg
KPR-212A
115/230 V AC, 50/60 Hz ~
230 W
T 3 A, 250 V
150 W RMS
300 W
12" woofer, 1.35" horn
115 dB (1 m)
150 W RMS
300 W
XLR or balanced ¼" jack
XLR or RCA
XLR or balanced ¼" jack
45 Hz - 20 kHz
600 x 410 x 350 mm
17 kg
32/32
KPR-215A
115/230 V AC, 50/60 Hz ~
280 W
T 3 A, 250 V
180 W RMS
360 W
15" woofer, 1.75" horn
120 dB (1 m)
180 W RMS
360 W
XLR or balanced ¼" jack
XLR or RCA
XLR or balanced ¼" jack
40 Hz - 20 kHz
710 x 490 x 440 mm
25 kg
11038692_V_1_1