Cleaning And Maintenance; Replacing The Fuse - Omnitronic ARM-6.5 User Manual

7

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the speaker system. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
If the speaker system distorts, one of the loudspeakers may be defective. Then the speaker system should
not be operated any more in order to prevent further damage. Please contact your dealer. If clacking sounds
are heard from the speaker system, screws may have loosened due to the continuous vibrations. The
speaker system should be checked by a specialist. Especially for public use, the speaker system should be
checked before every operation so that the speaker system and the speakers in the systems are always well
fixed.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

Replacing the Fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
replacing the fuse, unplug mains lead.
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
18