Table of Contents
Advertisement
F
Return to the normal screen.
Press PROG or OK. "PROGRAM COMPLETED" appears
on the TV screen for about 5 seconds, then the normal
screen appears. If "PROGRAM OVERLAPPED" appears
on the TV screen, see page 28.
● Repeat steps B – F for each additional programme.
G
Engage the unit's timer mode.
Press #. The unit turns off automatically and "#"
appears on the front display panel.
● To disengage the timer mode, press # again.
NOTES:
● To Change The Stop Time:
— press STOP +/– after pressing OK in step D. You can
compensate for anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials:
— after pressing OK in step D, press WEEKLY (number key
"9") for weekly serials or DAILY (number key "8") for daily
serials (Monday — Friday). Either "WEEKLY" or "DAILY"
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, "PROGRAM FULL" appears on the TV screen and
"FULL" appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
pg. 29)
ATTENTION
Guide Program Number Set
"G-
™/S
V
™
CODE
HOW
IEW
SETUP" appears
afterperforming step D if the
Guide Program number for
the G-
number you
CODE
entered has not been set.
Press
or the number keys
rt
to input the channel position
number on which your unit
receives that station, then
press OK or
to set the Guide Program number. The
e
G-
Program screen appears.
CODE
27
EN
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
2
– –
[0-9] OR [ / ]:SELECT
[PROG] : EXIT
Advertisement
Table of Contents
