Table of Contents
Advertisement
Section 3 - Configuration
This page lets you configure the settings for the DAP-1325's extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Existing Network
Existing
Select the type of existing network, either Ethernet or Wi-Fi
Network:
you want the DAP-1325 to connect to.
2.4 GHz Extended Wi-Fi
Status:
Enable or disable this network by toggling this slider.
Wi-Fi Name
This is the name of the DAP-1325's extended network.
(SSID):
If using Wi-Fi, the DAP-1325 will rebroadcast the uplink
router's Internet connection under this SSID. You may also
manually set the SSID of the extended network.
Security:
Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Password:
Enter the password or network key that you wish to use for
the extended network.
Select Auto or any channel from 1 to 13 for use with this
Wi-Fi
Channel:
network.
Select Auto 20/40 or 20 MHz for the bandwidth you wish
Channel
Width:
this network to use.
HT20/40
Enable or disable HT20/40 coexistence by toggling the slider.
Coexistence:
D-Link DAP-1325 User Manual
Settings
Extender Settings
32
Advertisement
Table of Contents
