D-Link DAP-1325/E User Manual page 10

Section 1 - Product Overview
1 Reset Button
2 Status/WPS LED
3 WPS Button
4
Signal Indicator LED
D-Link DAP-1325 User Manual
Status/WPS LED Indicator
1
4
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1325 for 10 seconds
to restore the factory default settings.
This LED indicates the current status of the DAP-1325, as detailed on the next page.
Press to establish a connection with another WPS compatible device. Pressing the WPS button for 1 second allows
you to connect with Wi-Fi clients using Wi-Fi Protected Setup. Refer to "WPS-PBC Configuration" on page 13 for
more information
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A
single solid amber LED indicates a weak Wi-Fi signal. Refer to "Wireless Signal Strength Indicator LED" on
page 7.
2 3
6