Wps-Pbc Configuration - D-Link DAP-1325/E User Manual

Section 3 - Configuration
The device is ready to connect to an
uplink network once the WPS/Status
LED is blinking amber.
D-Link DAP-1325 User Manual

WPS-PBC Configuration

Blinking
Push the WPS buttons on both the
source wireless router or access point.
The Status/WPS LED on the DAP-1325
will start to blink green. Please allow up
to two minutes for the process to finish
WPS Button
Blinking
WPS Button
The Status/WPS LED will turn solid
green once the DAP-1325 has
connected successfully to the uplink
wireless network. The new extension
network will be named:
(Source SSID)-EXT
The password be the same as the
source network's.
13