Table of Contents
Advertisement
_MPS-50.book Seite 8 Dienstag, 17. August 2010 10:57 10
Mounting the mains rectifier
5.1
Control elements
Item
in fig. 1,
Explanation
page 3
1
12/24 V socket
2
Glass fuse (250 V, 12 A, slow-blow)
3
Fastening holes
4
Compressor output terminals
5
Battery input terminals
6
Mains cable
6
Mounting the mains rectifier
If you wish to mount the mains rectifier in a fixed position, please observe the
following mounting instructions:
Do not mount the device
– In wet or damp environments
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
The place of installation must be well-ventilated. A ventilation system
which is at least equivalent to the air openings in the device must be
present for installations in closed housings.
The air intake on the underside or the air outlet on the back of the device
must remain clear.
The installation surface must be level and sufficiently sturdy.
➤ Secure the mains rectifier with screws through the fastening holes at the
front and the back of the device (fig. 1 3, page 3).
8
"More information https://www.caravansplus.com.au"
CoolPower MPS50
Advertisement
Table of Contents
