Dometic PERFECTPOWER DCDC 06, 12, 24 - Voltage Converter Manual

Overview

Fig. 1

Voltage converters DCDC06, DCDC12 and DCDC24 are switched mode, uninsulated voltage converters. The input and output are protected by an internal fuse. The LED on the front lights up when in operation.

Safety instructions

• Electronic devices are not toys!
  Always keep and use the device well out of the reach of children.
• Check that the voltage specification on the type plate corresponds to that of the energy supply.
• Do not operate the device near flames or other heat sources (heating, direct sunlight, gas ovens etc.).
• Never immerse the device in water.
• Protect the device and the cable against heat and moisture (e.g. rain).
• Mount the voltage converter in a well-ventilated, dry location.
  The voltage converter becomes hot during operation and the housing may reach a temperature of more than 40°C.
• Keep the connecting cable between the voltage converter and the battery as short as possible to avoid interference voltage.
• Only use cables that are certified for use with the currents specified in the technical data.

Scope of delivery

1 Converter, 4 Screws

Installing the converter

• Remove the converter's two brackets by pushing one end of the bracket off the converter's housing.
• Hold the drilling template (fig. 1) against the mounting surface and mark out the drill holes.
• Before drilling, make sure that there are no electrical cables behind the mounting surface.
• Drill the four holes with a 3 mm drill head.
• Attach the brackets using the supplied screws.
• Click the voltage converter into the brackets.
• Connect the voltage converter to the power using the supplied or equivalent cable lugs. Slide the cable lugs fully onto the contact pin.
• Check that the contact is secure by moving the cable connections.

Technical data

	DCDC06	DCDC12	DCDC24
Input voltage:		20 – 30 V
Closed-circuit input current:		8 mA
Rated input current:	5 A	10 A	18 A
Output voltage:		13.8 V -10 %
Rated output current:	6 A	12 A	24 A
Peak output current for 2 s:	10 A	18 A	30 A
Dimensions D x W x H (mm):	47 x 106 x 118	47 x 106 x 128	47 x 106 x 158
Weight (kg):	0.45 kg	0.5 kg	0.7 kg

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Dometic PERFECTPOWER DCDC 06, 12, 24 - Voltage Converter Manual