Related Manuals for Steelmate PTS810V7 BTI
Summary of Contents for Steelmate PTS810V7 BTI
- Page 1 Front & rear Parking assist system PTS810V7 Top front windshield display Manual BRM061...
-
Page 2: Table Of Contents
Contents User's Manual Installation Manual Important notice ---------------------------------------- Brief installation diagram ---------------------------- Disclaimer ----------------------------------------------- Packing list ---------------------------------------------- About the product ------------------------------------- Installation tools ---------------------------------------- Key features -------------------------------------------- Sensor installation ------------------------------------- Technical specifications ------------------------------ Display installation ------------------------------------ LCD display --------------------------------------------- Wire connection ---------------------------------------- Voice and volume adjustment ---------------------- Function test after installation ---------------------- Self-test function ---------------------------------------... -
Page 3: User's Manual
Important notice About the product Key features Parking assist systems help to provide assistance Parking assist system is an ultrasonic distance Complete front & rear protection when reversing and parking. Driving skills, such as monitoring system. It electronically detects the area 0.08s response time slowing down, use of mirrors etc. -
Page 4: Voice And Volume Adjustment
Display Voice and volume adjustment Turning ON/OFF voice alert Matrix indication (front) ACC ON Meters Press "SET" once Voice alert turned off START Volume Distance Damaged sensor indication Matrix indication (rear) Press "SET" button Ignition on seconds. (Front view) Press "SET"... -
Page 5: Self-Test Function
Self-test function Learning function for cars with tow-bar or spare wheel 1. Once the ignition is turned on, the system will test the 4 front sensors E,F,G and H automatically. 1) All sensors are working. 2) Damaged sensors are detected. Beep three times Be...Be...Be... -
Page 6: How Does The System Work
How does the system work Driving forward (6 sensor) Driving forward (8 sensor) +12V +12V +12V +12V +12V +12V 0.81m/2.6ft 0.40m/1.3ft Stop(<0.30m/1.0ft) 0.81m/2.6ft 0.35m/1.1ft Stop(<0.30m/1.0ft) No beep No beep... - Page 7 Reversing Zigzag reversing 0.30m/1.0ft Stop! (<0.30m/1.0ft) 1.21m/4.0ft 0.60m/2.0ft Stop(<0.30m/1.0ft) Be-Be-Be-Be- Be---Be---...
-
Page 8: Attention
Attention Sensor maintenance False detection may occur in the following situations: Do not wash the sensor with squirt gun or swab them forcibly. Installation Manual Please wash car with low-pressure water. Please melt the ice with warm water when the sensors are covered by ice. -
Page 9: Brief Installation Diagram
Brief installation diagram Packing list The actual sensor may vary from the image shown above Display Installation tools 60' ~ 80'... -
Page 10: Sensor Installation
Sensor installation Pls adjust the sensor angle according to sensor height and bumper angle, avoid detecting to ground. H > 45cm/1.5ft H < 65cm/2.1ft H > 40cm/1.3ft H < 60cm/2.0ft < 45cm/1.5ft < 45cm/1.5ft < 45cm/1.5ft 2.5m /0.8ft 0.9m /3.0ft 35cm/1.1ft <L1<... - Page 11 Check the size of the hole saw packed in the product to be matching the diameter of the sensors before drilling any holes.
- Page 12 Power Reversing light + Check the size of the hole saw packed in the product to be matching the diameter of the sensors before drilling any holes.
-
Page 13: Display Installation
Display installation Wire connection Display E F G H A B C D Pink Reversing light White Footbrake light Black wire Ground Sensor D Sensor C Sensor B Sensor A Sensor H Sensor G Sensor F Sensor E... -
Page 14: Function Test After Installation
Function test after installation Troubleshooting After installation, the display doesn’t work The display always shows 0.4/15.7ft~0. a) Are all wires connected properly? 6m/23.6ft. b) Is the ignition turned on? a) Are sensors mounted too low or detecting the c) Is the reverse gear selected or is the footbrake ground? pressed? b) Check whether the sensor is installed up-side-...
Need help?
Do you have a question about the PTS810V7 BTI and is the answer not in the manual?
Questions and answers