Brother HL-B2080DW Online User's Manual page 171

Examples of poor print quality
Envelope creases
Related Information
• Troubleshooting
• Test Print
• Clean the Drum Unit Using Drum Dot Print
• Reduce Toner Consumption
• Replace the Toner Cartridge
• Replace the Drum Unit
Recommendation
• Choose Improve Toner Fixing mode in the printer
driver.
If this selection does not provide enough
improvement, change the printer driver setting in
Media Type to a thick setting. If you are printing an
envelope, choose Env. Thick in the media type
setting.
• Make sure the two green levers inside the back cover
are pulled down to the envelope position when you
print envelopes. After you have finished printing, reset
the levers back to their original position. Pull up the
levers until they stop.
• Make sure envelopes are printed with the back cover
(face up output tray) opened.
• (For models with Manual Feed Slot)
Make sure envelopes are fed only from the manual
feed slot.
167