Check Before using Panel
Using LCD and LCD Button
LCD is mounted on DMS2 for installation and convenience of the user.
You can search menu and change setting using [▲] and [▼] buttons.
If you press and hold [▲] or [▼] button in some menu such as IP setting, the value
changes faster.
To go to upper menu or cancel, select [MENU] button.
To go to sub menu, select or save, press [SET] button.
Operates some menus with care because they are related to the proper operation of
DMS2 system.
If you do not use DMS2 buttons for long periods of time, set button lock to avoid
malfunction.
Manufacturer is not responsible for the damage caused by wrong operation.
Checking Main Menu
192.168.0.100
06:12:13(AM)
1. If IP and current time are displayed on LCD display, press
[Menu], [▲], [▼] or [Set] button.
Main menu screen will be displayed.
2. Check menu options by pressing [▲], [▼] buttons.
1
IP Config
2
In/Outdoor
3
DMS2 Version
4
DMS2 Time
5
Data Backup
6
Peak Level
7
Error Status
8
Password Reset
9
Button Lock
10
Safety Halt
Network information setting
Checking Indoor/Outdoor unit information
Checking DMS2 version
Setting DMS2 time
Setting data backup
Checking peak level
Checking error information
Password reset
Button lock function
Safe end function
147
E-