Samsung MIM-D00A User Manual page 30

Control and Monitoring (Continued)
Select SPI setting.
4
 You can set SPI through button activation / non activation.
Select Human Sensor setting .
5
 You can set Human Sensor through button activation / non activation.
Select Auto Clean setting.
6
 You can set Auto cleaning through button activation / non activation.
Note  SPI, Human Sensor, and Auto Clean will work only when the corresponding
options are installed and their normal operation is guaranteed when the
centralized controller is above MCM-A202D and Interface module is
MIM-B13D.
 Refer to the 'Controlling an indoor unit' for Global 4Way control. (Page 20~22)
 Refer to the 'Indoor unit operation mode limit' for Global 4Way operation
mode limit. (Page 23~25)
 Refer to the 'Setting lower/upper temperature Limit of an Indoor Unit' for
setting lower or upper temperature limit of Global 4Way. (Page 26~27)
30
E-