Samsung MIM-D00A User Manual page 52

Control and Monitoring (Continued)
Cycle Monitoring
You can select an indoor unit and check cycle information.
1 Click [Control and Monitoring]  [Cycle Monitoring] when DMS2 web page menu
screen appears.
2 Click [Select].
 DMS2 installation information will be displayed.
Select a device to check cycle information.
3
 If you select centralized controller, its subordinate outdoor unit which has the
earliest address will be selected.
 If you select interface module, its subordinate outdoor unit will be selected.
 If you select indoor unit, upper outdoor unit will be selected.
Cycle information of selected outdoor unit and subordinate indoor units.
4
 If the status of outdoor unit and indoor unit is changed, status value turns into blue.
Note You can check all the cycle information on DVM Plus 2 or DVM Plus 3 with the
centralized controller MCM-A202B and interface module MIM-B13B (or higher
version of those devices) only. However, some cycle information may not be
displayed on any other models of outdoor unit.
52
E-