Advertisement
Chapter 3: Operation
About Touchmonitor Adjustments
There will most likely be no need to be adjust your touchmonitor. However, variations in video
output and application may require adjustments to optimize display quality.
For best performance, your touchmonitor should be operating in its native resolution, 1280 x
1024 at 80k-75 Hz. Use the Display control panel in Windows to select the 1280 x 1024
resolution.
Operating in other resolutions will degrade video performance.
All adjustments you make to the controls are automatically memorized. This feature saves you
from having to reset your choices every time you unplug or power your touchmonitor off and
on. If there is a power failure, your touchmonitor settings will not default to the factory
specifications.
User Manual: 1915L
SW600066 Rev H, Page 15 of 38
Advertisement
