Table of Contents
Advertisement
Maintenance
MINI TURBO BRUSH
Brushbar Replacement
1. Remove the tool from the hose, and turn upside down.
Slide the switch to unlock position and remove bottom
plate.
2. Unscrew the one screw and remove belt guard.
3. Remove brushbar including end plates and discard.
4. I nspect belt to ensure that it is in good condition. If
broken or cracked, please replace. (See below for
details.)
5. With the curved ends facing down, slide end plates of
brushbar into slots on the tool.
6. T o replace bottom plate, insert the four tabs on edge
of bottom plate into slots on front of tool. Pivot bottom
plate down and snap closed.
Belt Replacement
1. Grasp turbine and pull firmly to remove.
2. Remove a screw, and lift the cover belt off.
3. Remove belt from turbine pulley. Replace with new belt.
4. With flat sides of turbine retainers pointing down, slide
retainers into grooves in tool housing and snap into
place.
5. Replace brushbar and bottom plate.
cleaning Brushbar
• C ut off pet hairs or threads surrounding brush with
scissors.
Maintenance _13
Advertisement
Table of Contents
