SU33 SERIES Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. English ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product.
Safety information IMpORTANT SAFETY INSTRUcTIONS Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING : To reduce the risk of fire, electric shock, or injury.
Safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED Indicates that a danger of death or serious injury exists.
Assembling the cleaner ATTAcH HANdLE TO VAcUUM 1. Stand the vacuum upright and slide the base of the handle fi rmly into the grooves at the top of the vacuum body. 2. Check to be sure the handle is fi tted to the vacuum body.
Operating the cleaner pOwER SwITcH The Power Switch is located on the side of the vacuum. Push the rocker switch "ON" to vacuum, and "OFF" when cleaning is complete. HANdLE pOSITIONS Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions.
Operating the cleaner SpEcIAL ON-BOARd TOOLS Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above fl oor vacuum cleaner when you select one of the special tools. 1. Raise Handle to Upright Position. 2.
Maintenance To maintain maximum cleaning performance, the following maintenance steps must be performed: WARNING 1. Empty the Dust Bin when the dirt reaches the “MAX” line on the side. To reduce the risk of electronic 2. Cleaning the Grille Cyclone when the Dust Bin shock, turn Power Switch OFF become clogged.
Maintenance cLEANING THE pRE-MOTOR FILTER Sponge Filter Micro Filter < washable > 1. Unplug the Vacuum Cleaner from electrical outlet. 2. The Pre-Motor Filter(Sponge Filter, Micro Filter) protects the motor from dirt particles. It is located underneath the Dust Bin. If the Pre-Motor Filter becomes dirty, remove and clean it.
Maintenance cHEcK ROTATING BRUSH ANd dRIVE BELT You should check your vacuum cleaner’s Rotating Floor WARNING Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, To reduce the risk of injury hair, and carpet fi bers.
Maintenance MINI TURBO BRUSH Brushbar Replacement 1. Remove the tool from the hose, and turn upside down. Slide the switch to unlock position and remove bottom plate. 2. Unscrew the one screw and remove belt guard. 3. Remove brushbar including end plates and discard. 4.
Page 12
Troubleshooting Check this list of possible problems and solutions before bringing your vacuum to a service center. pRObLEM possible solution Vacuum cleaner won’t run • Power cord not plugged in • Check electrical plug • Blown fuse/tripped breaker in home •...