PondXpert EasyFilter PXEF04500 Quick Start Manual

PXPF04500 – PXPF12000
Model
PXEF04500
PXEF09000
PXEF12000
PXEF20000
PXEF30000
All UV filters have a rated voltage of 220-240V, 50Hz

Introduction

Congratulations on the purchase of your pondXpert filter. Once your filter is connected you
can look forward to many years of healthy pond water.
Your filter is pump fed so must be connected to a suitable pond pump in order to work
correctly. Ideally a solids-handling pump will be used as this will push dirty waste and
debris into the filter. PondXpert filters are carefully inspected and tested to ensure both
safety and operating performance. However, failure to follow the instructions and warnings
in the manual may result in product damage and/or serious injury. Be sure to read and save
this manual for future reference.

General safety Instructions

Read and observe all of the instructions before installing, connecting and operating.
Make sure the filter is securely and correctly installed before switching on.
Always disconnect the UV when not in use and when carrying out maintenance.
Always disconnect all equipment in the pond before starting to handle, maintain, repair or
install any pond equipment.
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
UV Biological Pond Filter
Power Dimensions
Rating Diamtr x hght
270 x 370
7W
340 x 440
9W
11W 340 x 520
18W 413 x 694
24W 413 x 694
EasyFilter
PXPF20000, PXPF30000
Inlet /Outlet
Size
12/20/25mm
20/25/32/40mm
20/25/32/40mm
20/25/32/40mm
20/25/32/40mm
Max Pond Rec.
Vol. (Ltrs) Pump
4,500 PXFP03000
9,000 PXFP06000
12,000 PXFP08000
20,000 PXFP12000
30,000 PXFP15000