PondXpert Skimmster PXSKIMM01 Manual

Pond surface skimmer

Advertisement

Model
PXSKIMM01
Rated voltage of 220-240V, 50Hz.
Introduction
Congratulations on the purchase of your pondXpert skimmer. This unit is designed to keep
the surface of your pond clean of debris (eg, fallen leaves, blossom etc.)
The unit is powered by an integral pump powerful enough to keep a pond surface up to 25
square metres area clean.
PondXpert skimmers are carefully inspected and tested to ensure both safety and operating
performance. However, failure to follow the instructions and warnings in the manual may
result in product damage and/or serious injury. Be sure to read and save this manual for
future reference.
Your skimmer must always be immersed in fresh water before it is switched on.
Pond Surface Skimmer
Power Rating
Dimensions
LxWxD (mm)
40W
380x280x380
Skimmster
Max.
Flow
2500lph
Max Pond
Surface Area
25 SQM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Skimmster PXSKIMM01 and is the answer not in the manual?

Questions and answers

Summary of Contents for PondXpert Skimmster PXSKIMM01

  • Page 1 Rated voltage of 220-240V, 50Hz. Introduction Congratulations on the purchase of your pondXpert skimmer. This unit is designed to keep the surface of your pond clean of debris (eg, fallen leaves, blossom etc.) The unit is powered by an integral pump powerful enough to keep a pond surface up to 25 square metres area clean.
  • Page 2 Children should be supervised to ensure that they do not play with the appliance. For safety reasons, servicing or repair of this item should only be carried out by pondXpert. Never hang or carry the pump by the power cord.
  • Page 3 If your pondXpert pump fails please take it back to the retail outlet from where it was purchased. You will be required to take your receipt/proof of purchase with you. This does not affect your statutory rights.

Table of Contents