Table of Contents
Advertisement
Setup
R When registration is complete,
the hub sounds one long beep.
Note:
R To cancel without registering the
sensor, press M
on the sensor again.
R If registration fails, the hub sounds
several short beeps.
Using the app
When you register the window/door
sensor by using the [Home Network]
app, you can assign a name to your
devices and group them by location.
For more information, refer to the
User's Guide (page 17).
Changing the sensor
type
You can select whether a window/door
sensor functions as a window sensor or
as a door sensor. For more
information, refer to the User's Guide
(page 17).
Wireless
communication
range
The wireless communication range of
each device in the system from the hub
is approximately 50 m indoors and
approximately 300 m outdoors.
Wireless communication may be
unreliable when the following obstacles
are located between the hub and other
devices.
R Metal doors or screens
10
N on the hub and
R Walls containing aluminium-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows
R Multiple walls
R When using each device on
separate floors or in different
buildings
Note:
R You can check the window/door
sensor's communication status by
pressing M
is lit in green or red, the sensor is
communicating properly with the
hub. If the LED indicator blinks in
red, it is out of range of the hub.
N. If the LED indicator
Advertisement
Table of Contents
