Honda TRX 250EX 2008 Owner's Manual page 171

Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel rim
( ). 2
3. Tighten the wheel nuts in a crisscross (rather than a circular) pattern
to the specified torque:
47 lbf·ft (64 N·m , 6.5 kgf·m)
If a torque wrench was not used for installation, see your Honda dealer
as soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
If You Have a Flat Tire
Taking Care of the Unexpected
163