Honda TRX 250EX 2008 Owner's Manual page 152

Appearance Care
Finishing Touches
Refer to Saf ety Precautions
After washing your ATV, consider using a commercially-available
spray cleaner/polish or quality liquid or paste wax to finish the job. Use
only a non-abrasive polish or wax made specifically for motorcycles or
automobiles. Apply the polish or wax according to the instructions on
the container.
If a surface on your ATV is chipped or scratched, your Honda dealer
has touch-up paint to match your ATV's color. Be sure to use your
ATV's color code (page
If the frame has a chip that exposes the metal, first apply primer (to
prevent corrosion) and then apply the touch-up paint. Several thin
layers of touch-up paint are better than one thick coat.
Painted Aluminum Wheel Maintenance
Refer to Saf ety Precautions
Aluminum may corrode from contact with dirt, mud, or road salt. Clean
the wheels after riding through any of these substances. Use a wet
sponge and mild detergent. Avoid stiff brushes, steel wool, or cleaners
containing abrasives or chemical compounds.
After washing, rinse with plenty of water and dry with a clean cloth.
Then apply a mild, commercially-available spray cleaner/polish or wax.
For stained or dull-looking wheels, use a quality chrome/aluminum
polish to restore the finish.
Servicing Your Honda
144
on page 75
173 ) when you buy touch-up paint.
on page 75
.
.