Child (Key) Lock; Cancelling The Programme; End Of Programme - Beko DUT28430X User Manual

C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.

6.7 CHILD (KEY) LOCK

You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
activated.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the
door of the machine.
C
If you turn your machine off
by using On/Off key at the
end of the programme, the
Child Lock will be deactivated
automatically.
C
For energy saving, the product
is automatically turned off
following the completion of the
programme or if the programme
is not started.
To deactivate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3 seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
cancelled.
6.8 CANCELLING THE
PROGRAMME
1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the Start / Pause
indicator starts flashing. For a couple
of minutes the machine will fulfill
the necessary operations required to
cancel the programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
6.9 Salt indicator ( )
Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt warning indicator
appears on the display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
6.10 Rinse Aid indicator ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.

6.11 END OF PROGRAMME

End of Programme indicator will light up
once the washing programme is over.
1. Press the On/Off button to turn off
your machine.
23
USA