Table of Contents
Advertisement
Quick Links
DDN25401X
DDN25402W
DDN25402X
DDT25401B
DDT25401W
DDT25401X
DDT36430X
DDT36430XIH
DDT38530BX
DDT38530X
DDT38530XIH
DDT38530XWS
USA
Document Number :
Dishwasher
User's Manual
Installation Manual
DDT38532X
DDT38532XIH
DDT39432CF
DDT39432X
DDT39432XIH
DDT39434CF
DDT39434X
DDT39434XIH
DIN25401
DIT25401
DIT38530
DIT38532
15 9889 0100_BEKO_USA/ 24-08-21.(15:33)
DIT39432
DIT39434
DUT25401B
DUT25401W
DUT25401X
DUT36420W
DUT36420X
DUT36520W
DUT36520X
DUT36522W
DUT36522X
EN
Advertisement
Table of Contents
Related Manuals for Beko DDN25402W
Summary of Contents for Beko DDN25402W
- Page 1 Dishwasher User’s Manual Installation Manual DDN25401X DDT38532X DIT39432 DDN25402W DDT38532XIH DIT39434 DDN25402X DDT39432CF DUT25401B DDT25401B DDT39432X DUT25401W DDT25401W DDT39432XIH DUT25401X DDT25401X DDT39434CF DUT36420W DDT36430X DDT39434X DUT36420X DDT36430XIH DDT39434XIH DUT36520W DDT38530BX DIN25401 DUT36520X DDT38530X DIT25401 DUT36522W DDT38530XIH DIT38530 DUT36522X DDT38530XWS DIT38532 Document Number : 15 9889 0100_BEKO_USA/ 24-08-21.(15:33)
-
Page 2: Table Of Contents
To prevent accidents, which could cause serious injury or death, as well as machine damage read these instructions before installation and / or use. INTRODUCTION 1. IMPORTANT SAFETY INSTRUCTIONS 1.1 INSPECT THE DISHWASHER 2. TOOLS WHICH MAY BE NEEDED 3. MATERIALS WHICH MAY BE NEEDED 4. -
Page 3: Introduction
INTRODUCTION NOTICE : Please read this installation manual Read these installation instructions and particularly the safety instructions completely before installing and follow completely and carefully. They will save you them carefully. Save these installation time and effort and help to ensure optimum instructions and pass them on to any dishwasher performance. -
Page 4: Inspect The Dishwasher
If the dishwasher is installed in a NOTICE : • location that experiences freezing The dishwasher drain hose must be • temperatures (e.g. in a vacation home, installed with a drain loop at least cabin, etc.), you must drain all the 28”... -
Page 5: Tools Which May Be Needed
2. TOOLS WHICH MAY BE NEEDED 3. MATERIALS WHICH MAY BE NEEDED (Additional materials may be required to comply with local codes) Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line. Elbow with 3/4” FHT(female threaded) for dishwasher side, and sized to fit your water supply line (copper tubing/compression fitting, or braided hose) on the other side. -
Page 6: Materials Supplied
4. MATERIALS SUPPLIED 4.1 PARTS SUPPLIED 4.4 DISHWASHER PARTS BAG 2 Parts for your dishwasher will come in several plastic bags. (MODEL DEPENDING) Check your parts bags shown In addition to the manual bag to make sure you have all the and the dishwasher parts bag parts as listed to the left. -
Page 7: Dishwasher Specifications
5. DISHWASHER SPECIFICATIONS TALL TUB MODELS STANDART TUB MODELS... -
Page 8: Technical Features
5.1 TECHNICAL FEATURES Permissible water 4.35 - 145 psi (0.3 - 10 bars) pressure 120 V (volts), 12 A (amps), 60Hz (hertz) Electrical connection 1400 W (watts) Total power 1100 W (watts) Heater power NOTICE : Because we continually strive to improve our products, we may change our specifications and design without prior notice. -
Page 9: Enclosure Preparation
6. ENCLOSURE PREPARATION 6.1 ELECTRICAL PREPARATION WARNING The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes. 6.2 PREPARATION FOR INSTALLING MOUNTING BRACKETS e-f) STANDART TUB MODELS... - Page 11 (+50mm) WARNING Dishwasher must be secured to adjacent cabinetry using the mounting brackets provided. Failure to do this may cause damage to property or bodily injury. TALL TUB MODELS ONLY Tighten the plugs on both sides of your machine (v)
-
Page 12: Adjusting Height
Place the two mounting brackets into the top corners of the dishwasher. Fix the mounting brackets (A) to the top corners of the dishwasher, with the screws supplied. Bend sides of mounting brackets (B) in order to fix from sides (if necessary). 6.3 ADJUSTING HEIGHT If the height of the enclosure is 337/8”... -
Page 13: Installing The Side Trim Strips
6.4 INSTALLING THE SIDE TRIM STRIPS Remove the adhesive tape (Figure A). Place the trim strips on the front edge of the side walls (Figure B). NOTICE : Make sure you use the correct trim strip since there is a left and right side strip. The •... -
Page 14: Drain Preparation
WARNING Installation should be performed by a qualified installer. Work by unqualified persons could be dangerous and may void the warranty. If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a vacation home, cabin etc.), you must drain all the water from the dishwasher’s interior. - Page 15 6.6.1 UNDER THE SINK DRAIN (ALTERNATIVE) • • • • Due to the local bu�ld�ng code requ�rements, some d�shwasher �nstallat�ons requ�re hook�ng up d�scharge hose to an a�r gap located next to the s�nk �n k�tchens. S�nce the connect�on d�ameter �s d�fferent than standard d�scharge hose connect�ons, please use the connector p�ece prov�ded w�th the mach�ne w�th �nstruct�ons �llustrated.
-
Page 16: Steam Protection Foil
6.7 STEAM PROTECTION FOIL Steam will form inside the dishwasher during operation. At the end of the cycle, when the dishwasher door is opened, it is required to use a steam protection foil to prevent any steam from collecting on the underside of the counter top. 6.6.2 FITTING THE PROTECTION FOIL Before applying the steam protection foil to the underside of the countertop, clean the area with... -
Page 17: Placement Of Dishwasher Into The Opening
7. PLACEMENT OF DISHWASHER INTO THE OPENING Now place the dishwasher into the opening and get ready to connect all hoses and electrical connections. CAUTION Make sure all hoses are pulled through the side opening of the cabinet, no hoses are kinked and all slack is taken out as shown in the above figure. - Page 18 7.1.2 WATER SUPPLY CONNECTION Do not use any extension cord or • Water supply may be connected to the portable outlet device to connect the dishwasher in one of two ways: dishwasher to a power supply. With metal braided hose. •...
- Page 19 WARNING Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
-
Page 20: Readjusting Foot Levels
7.2 READJUSTING FOOT LEVELS Now that the dishwasher is in the cabinet you must readjust the feet to bring the dishwasher up to the required height and attach it underneath the countertop. 1. Readjust the front foot levels with adjusting wrench to balance the dishwasher and raise it up under the countertop, make sure the unit is level. - Page 21 TALL TUB MODELS ONLY Open the fixing part on the Toe Kick(p). (A) Place it on the slots, which are on the brackets fixed before, and adjust the height (max. 40 mm). (B) Close the fixing part on the Toe Kick. (C)
-
Page 22: Fixing The Cabinet To The Counter
7.4 FIXING THE CABINET TO THE COUNTER STANDART TUB MODELS... - Page 23 TALL TUB MODELS...
-
Page 24: Preparing The Timber Door
7.5 PREPARING THE TIMBER DOOR Mid. Point Mid. Point Weight (max) 9 Kg / 19 lbs Height (h) : Height of the wooden door 30” (760mm) Tall Tub Models Only Height (h) : Height of the wooden door 28” (720mm) Standart Tub Models Only Width (w) : 23 ¼”... -
Page 25: Preparing The Product Door
7.6 PREPARING THE PRODUCT DOOR... -
Page 26: Installing The Timber Door
7.9 INSTALLING THE TIMBER DOOR 7.10 FIXING THE TIMBER DOOR... -
Page 27: Fixing The Timber Door
7.11 FIXING THE TIMBER DOOR (yy) Ø 4 x 43mm 7.12 ADJUSTING THE KICK PLATE • Check whether the bottom of the door hits the toe kick of the kitchen cabinet (A). • If the door hits the toe kick cut the necessary section out of the toe kick (B). -
Page 28: Connection
7.13 CONNECTION ~ 1500 ~ 1800 ~ 2000... -
Page 29: Installer Checklist
8. INSTALLER CHECKLIST Remove drain hose from disposal • making sure plug is removed. Your installer must have completed and checked the following: NOTICE : The dishwasher is square and level. • If your dishwasher is not operating • The dishwasher is fastened securely •...