Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........23 AND ENVIRONMENT Upper basket height adjustable rack 24 General safety ........4 Ceiling cutlery basket ......24 Intended use ..........4 Children’s safety ........5 5 OPERATING THE PRODUCT 25 Disposing of packaging material ..5 Keys ............
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured from water supply connections. recyclable materials in accordance with our National Environment 3. Drain the remaining water in Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be installed...
Installation Permitted water temperature: up Attach the water discharge hose to the to 25°C drainpipe without bending it. Tightly fix the The dishwasher may not be connected to water discharge hose to the drainpipe in open warm water devices or flow-through order to prevent any dislocation of the water water heaters.
Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Cleaning, rinsing and drying performance of manner. your dishwasher will increase when water Wipe away any coarse food remnants on the softening system is adjusted properly.
Page 15
Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation It is recommended to use If the hardness level of the supply water granule- or powder-formed is above 90 °dF or if you are using well softening salts in the water water, then it is recommended to use water softening system.
Preparation Adding detergent You can put about 2 kg of softening salt into the salt Pay attention to the warnings reservoir. on the detergent packaging to get better washing and 5. Replace the lid and tighten it when the drying results. Contact the reservoir is full.
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water 3.
Preparation When you switch to powder 2. Fill the reservoir until “MAX” level. detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3.
Preparation Items not suitable for To prevent possible injuries, washing in the dishwasher always place the sharp and pointed dishes such as service Never wash dishes soiled by cigarette • fork, bread knife, etc. upside ash, candle remnants, polish, dyestuff, down so as their pointed ends chemicals, etc.
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User’s Manual 19 / 53 EN...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower basket efficient manner. of the machine are designed for an easier Since the cutlery basket can be moved (A, placement of large pieces such as pans, B), you can create more space while placing...
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Collapsible upper basket wires (depends on model) You can use collapsible wires when you need a larger space for your dishes in the upper basket of your machine. To bring the collapsible wires into horizontal position, grab the wire from the middle position and push them in the direction of You can lift up the upper basket arrow in the figure.
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Upper basket height adjustable rack (depends on model) Use the lower and upper parts of the height adjustable racks in the upper basket of the machine by sliding them down or up according to the heights of the glasses, cups or etc.
Operating the product Display 5. Function keys 2. On/Off key Half Load function 3. Start/Pause/Cancel key Fast+ Function 4. Time Delay key Extra Drying Function Super Rinse Function 6. Programme Selection keys 7. Programme indicator 12. End of Programme indicator 8.
Operating the product Keys 3. Press Programme Selection keys until the number of the programme you On / Off key selected appears on the Programme It is used to turn on or off the machine. indicator. Use P+ to switch to the next Press On / Off Key to switch ON.
Operating the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher are loading it completely. designed to obtain the best cleaning effect, Load your dishes in the machine as you considering the type of the soil, soiling degree like.
Operating the product Programming the washing at "a:1" option. Set the desired option by pressing the Time Delay key. time 3. Turn off the machine with On/Off key to Time Delay save the changes. If an economical electricity tariff is applied in your region, you can use the Time Interior Lighting Delay function to wash your dishes during...
Page 32
Operating the product To cancel the Time Delay function Pay attention not to open the Press and hold Start / Pause / Cancel key door of the machine when it is for 3 seconds. running. Stop the machine by 2. When the Start / Pause / Cancel key pressing Start / Pause / Cancel is pressed and hold, "3", "2", "1"...
Operating the product If you turn your machine off by Adjusting the water hardness using On/Off key at the end of level is explained in Water the programme, the Child Lock Softening System section. will be deactivated automatically. Rinse Aid indicator ( ) For energy saving, the product Please check the rinse aid indicator on the is automatically turned off...
Operating the product End of programme assured, E:01 icon will disappear. If E:01 does not disappear, there is a permanent fault. In End of Programme indicator will light up this case the authorised service should be once the washing programme is over. contacted.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 39
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 40
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 41
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 42
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the DUS26010W and is the answer not in the manual?
Questions and answers