Samsung SyncMaster T23A750 User Manual page 40

Basic Features
3. Place the wireless router in parallel with the Samsung
Wireless LAN adapter giving a gap no larger than 25cm.
✎
If One Foot Connection does not connect your
TV to your Router, a pop-up window appears on
the screen notifying you of the failure. If you want
to try using One Foot Connection again, reset
the wireless router, disconnect the Samsung
Wireless LAN adapter and then try again from
Step 1. You can also choose one of the other
connection setup methods.
4. The network connection screen appears, and network
setting is done.
5. Place the wireless router in a desired location.
✎
If the wireless router settings change or you install
a new wireless router, you must perform the One
Foot Connection procedure again, beginning
from Step 1.
Plug & access
¦
Plug & access function make you easy to connect samsung
TV and samsung wireless router by using USB memory stick.
If your wireless router does not support Plug & access, you
must connect using one of the other methods.
✎
You can check for equipment that supports Plug &
access on www.samsung.com.
How to set up using Plug & access function
Turn on the power of wireless router and TV.
1. Insert USB memory stick into our Samsung wireless
router and checking wireless router's LED status
(Blinking → On).
2. Then take USB memory out and insert it into Samsung
TV.
3. Wait until the connection is automatically established.
✎
If Plug & access does not connect your TV to
your wireless router a pop-up window appears
on the screen notifying you of the failure. If you
want to try using Plug & access again, reset the
wireless router disconnect the Samsung Wireless
LAN adapter and then try again from Step 1. You
can also choose one of the other connection
setup methods.
4. The network connection screen appears, and network
setting is done.
5. Place the wireless router in a desired location.
✎
If the wireless router settings change or you install
a new wireless router you must perform the Plug
& access procedure again, beginning from Step
1.
Priority QOS
Samsung wireless router is optimized HD aV
streaming for Samsung DTV
This is our product's distinctive function.
Samsung wireless Router can be connected with many
devices, such as laptop, mobile phone, BD player etc.
In case of connecting Samsung TV to Samsung
wireless Router while other devices are connected,
Samsung wireless Router will give Samsung TV a
priority connection than other devices.
This function ensures the best streaming contents and
throughput speed.
y Make your TV faster by giving priority bandwidth to
your TV (on/off optional).
y By giving priority to Samsung TVs, enjoy HD
content without buffering.
y Connection speed may vary based on the network
environment.
ad-Hoc Network Setup
¦
You can connect to a mobile device supporting Ad-hoc
without an wireless router through the "Samsung Wireless
LAN adapter". When connected to a mobile device, you can
use files on the device or connect to the Internet using the
AllShare or Multimedia function.
How to set up using WPS(PBC)
1. Go to Network Settings screen. (MENum → Network
→ Network Settings → ENTErE).
2. Select Wireless (General), and press ENTErE, then
press ENTErE again.
3. Select ad hoc. The message "ad hoc service
supports a direct connection with Wi-Fi compatible
devices like a cell phone or PC. The existing network
system may have limited functionality. Do you want
to change the network connection?" is displayed.
4. Select OK, and press ENTErE. The TV searches for
the mobile device.
5. When the TV finishes searching for mobile devices, input
the generated Network Name (SSID) and Security Key
into the device you want to connect.
✎
If network does not operate normally, check the
Network Name (SSID) and Security key again. An
incorrect Security key may cause a malfunction.
✎
If a device is connected once, it is displayed in the
Network Setting list. When you connect to it again, you
can find it in the List.
40
English