Basic Features
Changing the Picture Options
¦
advanced Settings
O
MENum → Picture → advanced Settings →
ENTErE
(advanced Settings are available in Standard / Movie
mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In HDMI1/DVI mode (when a PC is connected), only
Gamma and White Balance are available.
advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
Expert Pattern
RGB Only Mode
Colour Space
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■ Gamma: Adjust the primary colour intensity.
■ Expert Pattern (Off / Pattern1 / Pattern2): By running
the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎
While the Expert Pattern is running, sound is not
outputted.
✎
Only enabled on DTV, Component / HDMI models.
■ rGB Only Mode (Off / red / Green / Blue): Displays
the red, Green and Blue colour for making fine
adjustments to the hue and saturation.
Off
Medium
-2
0
Off
Off
Native
■ Colour Space (auto / Native / Custom): Adjust the
range of colours available to create the image.
✎
To adjust Colour, red, Green, Blue and reset,
set Colour Space to Custom.
■ White Balance: Adjust the colour temperature for a
more natural picture.
r-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
r-Gain / G-Gain / B-Gain: Adjust each colour's (red,
green, blue) brightness.
reset: Resets the White Balance to it's default settings.
■ 10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the Picture Mode is set to Movie
and when the external input is set to all input.
✎
Some external devices may not support this
function.
Interval: Select interval to adjust.
red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
reset: Resets the 10p White Balance to its default
settings.
■ Flesh Tone: Emphasize pink "Flesh Tone."
■ Edge Enhancement (Off / On): Emphasize object
boundaries.
■ Motion Lighting (Off / On): Reduce power consumption
by brightness control.
✎
3D is not supported.
33
English