Auto Tuning; Manual Tuning - Samsung SyncMaster T23A750 User Manual

Basic Features

auto Tuning

(depending on the country)
Scans for a channel automatically and stores in the TV.
✎
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
If a channel is locked using the Channel Lock function,
the PIN input window appears.
■ auto Tuning
– air / Cable: Select the antenna source to memorise.
Digital & analogue / Digital / analogue: Select the
channel source to memorise.
✎
When selecting Cable → Digital & analogue
or Digital: Provide a value to scan for cable
channels.
x
Search Mode (Full / Network / Quick): Scans
for all channels with active broadcast stations
and stores them in the TV.
✎
If you select Quick, you can set up the
Network, Network ID, Frequency,
Modulation and Symbol rate manually
by pressing the button on the remote
control.
x
Network (auto / Manual): Selects the Network
ID setting mode among auto or Manual.
x
Network ID: When Network is Manual, you
can set up Network ID using the numeric
buttons.
x
Frequency: Displays the frequency for the
channel. (differs in each country)
x
Modulation: Displays available modulation
values.
x
Symbol rate: Displays available symbol rates.
■ Cable Search Option
(depending on the country)
Sets additional search options such as the frequency
and symbol rate for a cable network search.
– Start Frequency / Stop Frequency: Set the start or
stop frequency (differs in each country).
– Symbol rate: Displays available symbol rates.
– Modulation: Displays available modulation values.

Manual Tuning

Scans for a channel manually and stores in the TV.
✎
If a channel is locked using the Channel Lock function,
the PIN input window appears.
■ Digital Channel Tuning: Scans for a digital channel.
1. Press the u / d / l / r button to select New.
✎
When selecting antenna → air: Channel,
Frequency, Bandwidth
✎
When selecting antenna → Cable: Frequency,
Modulation, Symbol rate
2. Press the d button to select Search. When
scanning has finnished, a channel is updated in the
channel list.
■ analogue Channel Tuning: Scans for a analogue
channel.
1. Press the u / d / l / r button to select New.
2. Set the Programme, Colour System, Sound
System, Channel and Search.
3. Press the d button to select Store. When scanning
has finnished, a channel is updated in the channel
list.
✎
Channel mode
x
P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
x
C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
Guide Type (Samsung / rovi On Screen)
(depending on the country)
You can select a different type of Guide.
■ Samsung: Uses the guide programme provided by
Samsung.
■ rovi On Screen: Uses the guide programme provided
by Rovi International Solutions.
– ROVI EPG initial setting time can take a while
depending on the region or broadcast environment.
28
English