Connections; Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung SyncMaster T23A750 User Manual

Connections

Connections
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
DC 14V
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWErP button. Plug & Play is available only when the Input Source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected.
1
Selecting the OSD Language.
2
Setting up the Network
3
Selecting the usage mode
4
Select Country
5
Setting the Clock Mode
6
Selecting search options for auto
tuning
7
Enjoy your TV.
If You Want to reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0"(except France).
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to "0-0-0-0"(France: "1-1-1-1"):

Connecting to an Antenna

TA950
TA750
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTErE button. Select the desired
OSD (On Screen Display) language.
Set up your network connection. Press the ENTErE button to start. If you do not
know your network set up information or want to set to it later, select Skip. You can
set up the network connection later using the Network menu.
✎
When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade later,
select the Skip.
Press the ▲ or ▼ button to select Home use, and then press the ENTErE
button twice.
y Select the Home use mode. Store Demo mode is for retail environments.
Press the ▲ or ▼ button, then press the ENTErE button. Select the
appropriate country.
Press the ▲ or ▼ button to select auto or Manual, then press the ENTErE
twice.
✎
If you selected Manual, you'll go to the Date and Time screen. Select Date
or Time, and then press ENTErE. Then, use the number buttons or the
▲ or ▼ button to set the date or time. Use the ◄ or ► button to move
between entry fields. When done setting the Date and Time, select Next,
and then press ENTErE
Press the ▲ or ▼ button, then press the ENTErE button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → auto Tuning.
✎
Press the ENTErE button at any time to interrupt the memorisation
process.
If you want to watch a broadcast programme, select Close. If you want to enjoy
the Smart Hub, select the Smart Hub.
(MENu → System) again at home although you did in shop.
(off) →
POWEr
ANT IN
→ 8 → 2 → 4 →
MuTE
Cable
ANT OUT
POWEr (on).
14
English