KleenRite 36435D3 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. KleenRite Manuals
  4. Vacuum Cleaner
  5. 36435D3
  6. Operator and parts manual

KleenRite 36435D3 Operator And Parts Manual

Carpet and upholstery cleaner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
36435D3
Carpet And Upholstery Cleaner
Model No.:
Operator and Parts Manual
36435D3 – 11 gal Extractor
KLEENRITE
1122 MAPLE STREET
MADERA CA 93637 U.S.A.
FAX: 1-559-673-5725
MNL36435D3
CUSTOMER SERVICE: 1-800-241-4865
Rev. 00 (12-09)

Advertisement

Table of Contents
loading

Related Manuals for KleenRite 36435D3

Summary of Contents for KleenRite 36435D3

  • Page 1 ® 36435D3 Carpet And Upholstery Cleaner Model No.: Operator and Parts Manual 36435D3 – 11 gal Extractor KLEENRITE 1122 MAPLE STREET MADERA CA 93637 U.S.A. FAX: 1-559-673-5725 MNL36435D3 CUSTOMER SERVICE: 1-800-241-4865 Rev. 00 (12-09)

  • Page 2: Table Of Contents

    © Kleenrite Printed in U.S.A. distributor or directly from Kleenrite. Kleenrite Equipment is a registered United States trademark This machine will provide excellent service. However, the best results will be obtained at minimum costs if:  The machine is operated with reasonable care.

  • Page 3: Safety Precautions

    Keep cord away from heated surfaces. – Report machine damage or faulty operation immediately. – Follow mixing and handling instructions on GROUNDING chemical containers. – Connect hoses before turning on pump. – Be sure chemicals are safe and non-toxic. 36435D3 (12-09)

  • Page 4: Machine Components

    FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers. Fig. 1 3. Using a clean bucket or hose, fill solution tank with 41 liters (11 gallons) of hot water, 60° C (140° F) maximum (Figure 2). Fig. 2 36435D3 (12-09)

  • Page 5: Machine Operation

    1. Connect accessory tool hoses to the couplers at maximum temperature (Figure 4). the end of the hoses already attached to the machine. (Figure 7). CLEANING CARPETS 1. Activate vacuum, pump, and heater switches and proceed to clean (Figure 5). Fig. 7 Fig. 4 Fig. 5 36435D3 (12-09)

  • Page 6: Draining Tanks

    2. Turn on vacuum and pump for 15 seconds. This will fill the pump and hoses with air and prevent Fig. 9 freezing. 3. Rinse tank with clean water at the end of the day. 3. Replace empty-out nozzle to its storage place. 36435D3 (12-09)

  • Page 7: Machine Maintenance

    3. Inspect cord and cord grip for damage. Replace immediately if damaged. 4. Lubricate metal shaft on recovery tank drain with water resistant oil. 5. Lubricate female hose couplers with lightweight oil. 36435D3 (12-09)

  • Page 8: Trouble Shooting

    Plugged spray tips. Clean or replace tips. Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. 36435D3 (12-09)

  • Page 9: Specifications

    POWER CORDS 2 @ 7.6m (25 ft) 3/12 DECIBEL RATING 3 METERS (10 FT) FROM <68 db(A) MACHINE ON CARPET MACHINE DIMENSIONS 1016 mm 902 mm (40 in) (35.5 in) 711 mm 450 mm (28 in) (17.7 in) 36435D3 (12-09)

  • Page 10: Electrical Diagram

    ELECTRICAL DIAGRAM 36406E3HX 120 V WIRING DIAGRAM 36435D3 (12-09)

  • Page 11: Parts List

    PARTS LIST 36406E3HX TANK GROUP 36435D3 (12-09)
  • Page 12 LID COMPLETE EDGE 3-GREY GRANITE D-20.01 ELBOW 90 1/4NPT X -4 SAE SK-09.8 CORD,PIG TAIL EDGE COMP. D-41 NIPPLE, 1/4 NPT CLOSE BR SK-85F/HNDL HARNESS,HNDL EDGE C2H CI C1PVV E-14.65 CUFF, 1 1/2 SLIP 1 1/2 HOSE  RECOMMENDED STOCK ITEMS 36435D3 (12-09)
  • Page 13 PARTS LIST 36406E3HX BASE GROUP 36435D3 (12-09)
  • Page 14 ELBOW 90 1/4NPT X -4 SAE PUMP,DIAPH 150 PSI 120V W/WIR&SWITCH D-20.015 ELBOW 90 1/4NPT X -6 SAE SM-0277.1 EXCHG,HT EDGE 110V 1750 D-48.5 TEE,STREET 1/4 NPT BRASS SR-08/6 INSULATION,HTR EDGE  D-93.4 VALVE,PRESSURE REL 1/4 SS  RECOMMENDED STOCK ITEMS 36435D3 (12-09)
  • Page 15 SWITCH ASM, 100 PSI SH FL  L-22.65 CHECK VALVE ASM, 100 PSI SH FL L-24.12 HEAD, PUMP DIAPHRAGM  L-22.8 VALVE ASM, BYPASS SH FL L-22.9 DIAPHRAGM, SOLID DRIVE ASM SL-22.4 MOTOR,100 PSI 120V SH FL PLG  RECOMMENDED STOCK ITEMS 36435D3 (12-09)

  • Page 16: Options

    "U"CLAMP,SUPP HOE HNDL EC D-41 NIPPLE, 1/4 NPT CLOSE BR M-20 WAND,"S"BND FLTL COM W/HD  F-09 Q/C 1/4" PLUG BR SHUT OFF SC-82 TRIGGER,COMP KNGSTN VALVE G-23 VALVE,KNGSTN STD "S" BEND SE-06.7/39.2 HOSE,1/4"SOL BLU X39.25DB  RECOMMENDED STOCK ITEMS 36435D3 (12-09)
  • Page 17 Q/C 1/4" PLUG BR SHUT OFF SG-04.5 STEM ASM 4"TOOL BUNA W/BRASS CAP G-04.5 GUIDE, VALVE STEM HEX BRASS SJ-60 HANDLE ASM, 4" DETAIL TOOL G-05.5 STEM, VALVE SS 4" DETAIL TOOL SJ-62 VALVE,NYLON COMPLETE STD 4"DETAIL G-08.5 SPRING, VALVE 4" UPH TOOL 36435D3 (12-09)

  • Page 18: Warranty Policy

    Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight).
  • Page 19 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 20 Purchased From (Distributor) 36435D3 (12-09)
  • Page 21 Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
  • Page 22 Purchased From (Distributor) 36435D3 (12-09)

Table of Contents