Table of Contents
Advertisement
8) Input Stream ID Filter: The Input Stream Identifier (ISI) Filter may be used by your receiver to filter
streams based this value. If the ISI checkbox is selected, then the receiver will only demodulate
streams that have an ISI value that is the same as the value shown in the ISI box. This command
should only be used if the ISI stream value is set on the incoming DVB-S2 stream and if the ISI
value is know. You may have to contact your uplink provider for assistance. For DVB-S operation,
the ISI input will be grayed out.
NOTE:
then the contents of the ISI Filter box will be ignored by the receiver.
9)
Apply: By pressing this button, the updates are sent to the receiver.
10) Exit: Exits back to the main screen
Version: 2.02
-
If the Search Mode is set to Both and the received stream is DVB-S,
Confidential and Proprietary
22 of 50
Advertisement
Table of Contents
