Napoleon Prestige Pro 500 RB Manual page 17

BUILT-IN UNIT OPENING DIMENSIONS
MODEL
BIP / BIPRO500
SIDE BURNER
!
!
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
OPENING FOR WIRES
(2" (51mm)
RECOMMENDED
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
N415-0541 APR 11.19
N415-0541 APR 11.19.indd 17
OPENING DIMENSIONS
W D
30 3/4" 20 5/8"
781 mm 524 mm
12 3/4" 16 1/2"
324 mm 419 mm
WARNING!
This grill is designed for installation in a built-in enclosure constructed of combustible
materials when installed with zero clearance liner Part No. BI-3323-ZCL and must be installed and
serviced by a qualified installer to local codes.
WARNING!
When not installing with the zero-clearance liner, use only non-combustible materials
(certified to ASTM E-136) such as steel studs, cement board, ceramic tile, marble, paint etc. When
adding finishing materials to the appliance. Do not use wood or drywall.
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
34" (864mm)
NOTES
H
8 7/8" WITHOUT ZERO CLEARANCE LINER
225 mm
4 1/2" OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
114 mm COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
H
!
WARNING!
A propane tank
can not be stored below the gas
grill.
WARNING!
!
CABINET FRAME,
CABINET AND COUNTER TOP MUST BE
MADE FROM NON-COMBUSTIBLE MATERIAL WHEN
NOT INSTALLED WITH THE ZERO CLEARANCE LINER
PART NO. BI-3323-ZCL
17
EN
www.napoleon.com
4/11/2019 4:27:24 PM