Table of Contents
Advertisement
2. In the Windows 2000 installation procedure an extra window appears
prompting you to select whether you would like to install the "Digital Signature
Not Found" or not. You can safely select "YES".
3.4 Uninstall
Procedure Under
Windows 98/Me
In order to uninstall the Configuration & Monitor Utility from Windows 98/Me, you must
select the "Unistall Configuration & Monitor Utility" option (Start -> Programs -> Atmel
802.11 Wireless LAN -> Unistall Configuration & Monitor Utility). It is recommended to
stop the USB (A) card and "Exit" the application prior to starting the unistallation procedure.
If during the unistall procedure you receive an error message, please insert the
CD which contains the setup program and try to uninstall the Utility again.
The above procedure uninstalls the Configuration & Monitor Utility, but not the card
itself. In order to uninstall the Fast-VNET card from Windows 98/Me, you must double
click on the "Network" option in the "Control Panel" (Start -> Settings -> Control Panel).
Select the "ATMEL USB FastVNET (A)" card from the list and press the "Remove" button.
The system will prompt you to re-boot. Press "Yes" to re-boot.
3.5 Uninstall
Procedure Under
Windows 2000
The procedure in order to remove the Monitor & Configuration Utility is the same with the
one described for Windows 98/Me.
In order to uninstall the Fast-VNET card from Windows 2000 you must select it in the
Device Manager of Windows 2000 and press "Uninstall". The "Uninstall" procedure
can be performed only if the Fast-VNET card is plugged in.
Advertisement
Table of Contents
