Sena PS110W User Manual page 79

login: root
Password:
# editconf
_] / [________________________________________________________________________
1. Network configuration
2. Serial port configuration
3. System administration
________________________________________________________________________________
COMMAND (Display HELP : help)>3
_] System administration [____________________________________________________
1. System status
2. System logging
3. Device Name : PSx10W
4. Date and time
5. Change password
6. User Administration
7. Factory reset
8. Firmware upgrade
________________________________________________________________________________
COMMAND (Display HELP : help)>8
_] Firmware upgrade [_________________________________________________________
Do you want to upgrade firmware? [yes/no] yes
Transfer firmware by zmodem using your terminal application.
To escape, press Ctrl+X
**B0ff000005b157
Figure 5-10 Firmware upgrade using remote/serial console
Figure 5-11 Transfer binary file by Zmodem (TeraTerm Pro)
79
서식 있음: 글머리 기호 및
번호 매기기
삭제됨:
삭제됨:
삭제됨: Follow the online
directions and transfer the
firmware binary file using
the Zmodem protocol as
shown in Figure 5-10Figure
5-10Figure 5-10Figure
5-10Figure 5-10Figure
5-10Figure 5-10.
Once the upgrade has been
completed, the system will
reboot to apply the changes
If the firmware upgrade fails,
the Pro Series will display
error messages as shown in
Figure 5-11Figure
5-11Figure 5-11Figure
5-11Figure 5-11Figure
5-11Figure 5-11. It will also
maintain the current
firmware version.