Port Event Handling Configurations - Sena PS110W User Manual

the section 3.9 NFS server configuration for details of NFS server configuration.
Port log buffer size
This parameter defines the maximum amount of port log data to be logged. When using internal
memory to store the log data, the total size of the port buffer cannot exceed 10 Kbytes.
When using an NFS server to store log data, the maximum port buffer size is unlimited. The user
should configure the NFS server to ensure that the port logging system works properly.

4.2.9. Port event handling configurations

The Pro Series provides a user for a means of monitoring or reacting to data from serial device
attached to a serial port of it through Port event handling configuration. Namely, user can define
keywords for each serial port that will trigger the email/SNMP notification or command sent to the
serial port directly on Port event handling configuration. This will enable the user to monitor the data
from the attached device or to manage/control a device attached serial port directly when pre-defined
keywords are detected. Also, the status of the connection between the Pro Series and the serial
device and the status of the TCP connection between the Pro Series and remote hosts could be
monitored and managed as well.
Each reaction can be configured individually upon each event. Reaction can be an email delivery,
SNMP trap sending, command sending or either combination of all reactions.
Port event handling
If the user wants to enable port event handling feature, set Port event handling as enable. This is
a global parameter so if this feature is disabled, the Pro Series does not take any actions on port
events.
Figure 4-16 Port logging configuration
68
삭제됨:
삭제됨:
서식 있음: 글머리 기호 및
번호 매기기
삭제됨: